- Max Flow: 4000L/hr
- Max Head: 2.35m
- Flow at 1m: 3500L/hr
- Cable Length: 5m (may be extended up to a total of 60m)
- With this 24VAC low voltage pump you can extend the pump cable using our 3.3mm2 low voltage cable with connectors to a total of 60m before a voltage drop occurs
- Power Consumption & Voltage: 75W 24VAC
- Transformer included (see image) - Outdoor IP68 rated 24 Volt AC 100VA, 4.2A. Being ingress rated IP68 means that it can be buried in wet ground.
- Attachments: Flow Control, single and double volcano, foaming geyser, bell fountain, foam filter, waterfall outlet, aerator venturi outlet fitting
- Inlet Size: 25mm barbed director & 1" BSP female threaded inlet
- Outlet Size: 19mm and 25mm barbed director adaptors which screw into the 3/4" BSP female threaded pump outlet. Also 12mm, 19mm, 25mm & 3/4"BSP male thread off the fountain head tee-piece if you run the fountain and waterfall
- Dimensions (LxWxD): 200x108x140mm
- Max permissible fluid temperature: 35 deg celsius
- Weight: 3.5kg
- Inline use: Suitable for use inline externally as a flooded suction set-up.
- Fully submersible
Warranty: 2 years (motor only, excludes impeller)