AquaSurge™ 3000 Pond & Waterfall Pump:
Head Height - 4.49 Metres
Max volume - 12100 lts/hr
Power consumption - 180 watts
Discharge - 40 mm - expand or reduced pipe size to suit our application
These Submersible Pond and Waterfall Pumps are designed for 24 hour use and will provide the volume needed for a waterfall or stream. Remember multiple pumps can be used for extra large features, double waterfalls or creeks.
They can be mounted vertically or horizontally. Two pumps can be used side by side in a Pond Skimmer with their own check valve and bulkhead fitting. They are also small enough to fit in a Micro Skimmer unit.
The Aquasurge Pond and Waterfall Pump range are heavy duty professional pumps rated for constant use or for use on a timer.
This AquaSurge® 3000 Pump Features:
- Fully submersible and with thermal cutoff
- 4.49 meter total head height. Flow rate at 1.5 meters : 9700 lts/hr. Flow rate at 3 meters : 7200 lts/hr
- Heavy duty construction, stainless interior and bearings
- Robust, reliable, efficient, and quiet!
- Low electrical operating cost
- Fish safe – uses no oil
- Designed for 40 mm or 50mm plumbing
- Can be used vertically or horizontally
- 3 year warranty
Choose your pump well. Its better to get a slightly over-sized pump that you can then throttle down to the flow you prefer. A pump with a bit of back pressure reduces the cavitation in a centrifugal pump.
When looking for a pond pump always check the wattage of the pump before you buy. Volume may be perfect and the price may be good but if its rated over 400watts then you need to consider ongoing power consumption. There are sump pumps out there consume over 800watts. Do your research.
For a good flowing waterfall you will need approximately 1400 lts/hr for every 10 cm of waterfall width.
Pump Performance Selector.
Larger volume submersibles are available and with more head height, call us for more info regarding your specific needs.